Network Working Group D. Nelson Request for Comments: 4670 Enterasys Networks Obsoletes: 2620 August 2006 Category: Informational RADIUS Accounting Client MIB for IPv6 Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2006). Abstract This memo defines a set of extensions that instrument RADIUS accounting client functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS accounting clients. This memo obsoletes RFC 2620 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2620 are carried forward into this document. This memo also adds UNITS and REFERENCE clauses to selected objects. Nelson Informational [Page 1]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 Table of Contents 1. Introduction ....................................................3 2. Terminology .....................................................3 3. The Internet-Standard Management Framework ......................3 4. Scope of Changes ................................................3 5. Structure of the MIB Module .....................................4 6. Deprecated Objects ..............................................5 7. Definitions .....................................................5 8. Security Considerations ........................................19 9. References .....................................................20 9.1. Normative References ......................................20 9.2. Informative References ....................................21 Appendix A. Acknowledgements ......................................22 Nelson Informational [Page 2]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 1. Introduction This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. The objects defined within this memo relate to the Remote Authentication Dial-In User Service (RADIUS) Accounting Client as defined in RFC 2866 [RFC2866]. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. This document uses terminology from RFC 2865 [RFC2865] and RFC 2866 [RFC2866]. This document uses the word "malformed" with respect to RADIUS packets, particularly in the context of counters of "malformed packets". While RFC 2866 does not provide an explicit definition of "malformed", malformed generally means that the implementation has determined the packet does not match the format defined in RFC 2866. Those implementations are used in deployments today, and thus set the de facto definition of "malformed". 3. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 4. Scope of Changes This document obsoletes RFC 2620 [RFC2620], RADIUS Accounting Client MIB, by deprecating the radiusAccServerTable table and adding a new table, radiusAccServerExtTable, containing radiusAccServerInetAddressType, radiusAccServerInetAddress, and radiusAccClientServerInetPortNumber. The purpose of these added MIB objects is to support version-neutral IP addressing formats. The Nelson Informational [Page 3]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 existing table containing radiusAuthServerAddress and radiusAuthClientServerPortNumber is deprecated. The remaining MIB objects from RFC 2620 are carried forward into this document. RFC 4001 [RFC4001], which defines the SMI Textual Conventions for IPv6 addresses, contains the following recommendation. 'In particular, when revising a MIB module that contains IPv4 specific tables, it is suggested to define new tables using the textual conventions defined in this memo [RFC4001] that support all versions of IP. The status of the new tables SHOULD be "current", whereas the status of the old IP version specific tables SHOULD be changed to "deprecated". The other approach, of having multiple similar tables for different IP versions, is strongly discouraged.' 5. Structure of the MIB Module The RADIUS accounting protocol, described in RFC 2866 [RFC2866], distinguishes between the client function and the server function. In RADIUS accounting, clients send Accounting-Requests, and servers reply with Accounting-Responses. Typically, Network Access Server (NAS) devices implement the client function, and thus would be expected to implement the RADIUS accounting client MIB, while RADIUS accounting servers implement the server function, and thus would be expected to implement the RADIUS accounting server MIB. However, it is possible for a RADIUS accounting entity to perform both client and server functions. For example, a RADIUS proxy may act as a server to one or more RADIUS accounting clients, while simultaneously acting as an accounting client to one or more accounting servers. In such situations, it is expected that RADIUS entities combining client and server functionality will support both the client and server MIBs. The client MIB is defined in this document, and the server MIB is defined in [RFC4671]. This MIB module contains two scalars as well as a single table, the RADIUS Accounting Server Table, which contains one row for each RADIUS server with which the client shares a secret. Each entry in the RADIUS Accounting Server Table includes fifteen columns presenting a view of the activity of the RADIUS client. This MIB imports from [RFC2578], [RFC2580], [RFC3411], and [RFC4001]. Nelson Informational [Page 4]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 6. Deprecated Objects The deprecated table in this MIB is carried forward from RFC 2620 [RFC2620]. There are two conditions under which it MAY be desirable for managed entities to continue to support the deprecated table: 1. The managed entity only supports IPv4 address formats. 2. The managed entity supports both IPv4 and IPv6 address formats, and the deprecated table is supported for backwards compatibility with older management stations. This option SHOULD only be used when the IP addresses in the new table are in IPv4 format and can accurately be represented in both the new table and the deprecated table. Managed entities SHOULD NOT instantiate row entries in the deprecated table, containing IPv4-only address objects, when the RADIUS accounting server address represented in such a table row is not an IPv4 address. Managed entities SHOULD NOT return inaccurate values of IP address or SNMP object access errors for IPv4-only address objects in otherwise populated tables. When row entries exist in both the deprecated IPv4-only table and the new IP-version-neutral table that describe the same RADIUS accounting server, the row indexes SHOULD be the same for the corresponding rows in each table, to facilitate correlation of these related rows by management applications. 7. Definitions RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, Gauge32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; radiusAccClientMIB MODULE-IDENTITY LAST-UPDATED "200608210000Z" -- 21 August 2006 ORGANIZATION "IETF RADIUS Extensions Working Group." CONTACT-INFO " Bernard Aboba Microsoft One Microsoft Way Nelson Informational [Page 5]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 Redmond, WA 98052 US Phone: +1 425 936 6605 EMail: bernarda@microsoft.com" DESCRIPTION "The MIB module for entities implementing the client side of the Remote Authentication Dial-In User Service (RADIUS) accounting protocol. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4670; see the RFC itself for full legal notices." REVISION "200608210000Z" -- 21 August 2006 DESCRIPTION "Revised version as published in RFC 4670. This version obsoletes that of RFC 2620 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2620 are carried forward into this version." REVISION "199906110000Z" -- 11 Jun 1999 DESCRIPTION "Initial version as published in RFC 2620." ::= { radiusAccounting 2 } radiusMIB OBJECT-IDENTITY STATUS current DESCRIPTION "The OID assigned to RADIUS MIB work by the IANA." ::= { mib-2 67 } radiusAccounting OBJECT IDENTIFIER ::= {radiusMIB 2} radiusAccClientMIBObjects OBJECT IDENTIFIER ::= { radiusAccClientMIB 1 } radiusAccClient OBJECT IDENTIFIER ::= { radiusAccClientMIBObjects 1 } radiusAccClientInvalidServerAddresses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets received from unknown addresses." ::= { radiusAccClient 1 } Nelson Informational [Page 6]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 radiusAccClientIdentifier OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The NAS-Identifier of the RADIUS accounting client. This is not necessarily the same as sysName in MIB II." REFERENCE "RFC 2865 section 5.32" ::= { radiusAccClient 2 } radiusAccServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAccServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { radiusAccClient 3 } radiusAccServerEntry OBJECT-TYPE SYNTAX RadiusAccServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { radiusAccServerIndex } ::= { radiusAccServerTable 1 } RadiusAccServerEntry ::= SEQUENCE { radiusAccServerIndex Integer32, radiusAccServerAddress IpAddress, radiusAccClientServerPortNumber Integer32, radiusAccClientRoundTripTime TimeTicks, radiusAccClientRequests Counter32, radiusAccClientRetransmissions Counter32, radiusAccClientResponses Counter32, radiusAccClientMalformedResponses Counter32, radiusAccClientBadAuthenticators Counter32, radiusAccClientPendingRequests Gauge32, radiusAccClientTimeouts Counter32, radiusAccClientUnknownTypes Counter32, radiusAccClientPacketsDropped Counter32 } Nelson Informational [Page 7]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 radiusAccServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A number uniquely identifying each RADIUS Accounting server with which this client communicates." ::= { radiusAccServerEntry 1 } radiusAccServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry." ::= { radiusAccServerEntry 2 } radiusAccClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The UDP port the client is using to send requests to this server." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerEntry 3 } radiusAccClientRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 4 } -- Request/Response statistics -- -- Requests = Responses + PendingRequests + ClientTimeouts -- -- Responses - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received Nelson Informational [Page 8]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 radiusAccClientRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Request packets sent. This does not include retransmissions." REFERENCE "RFC 2866 section 4.1" ::= { radiusAccServerEntry 5 } radiusAccClientRetransmissions OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 6 } radiusAccClientResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS packets received on the accounting port from this server." REFERENCE "RFC 2866 section 4.2" ::= { radiusAccServerEntry 7 } radiusAccClientMalformedResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses." REFERENCE "RFC 2866 section 3" Nelson Informational [Page 9]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 ::= { radiusAccServerEntry 8 } radiusAccClientBadAuthenticators OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Response packets that contained invalid authenticators received from this server." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerEntry 9 } radiusAccClientPendingRequests OBJECT-TYPE SYNTAX Gauge32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout, or a retransmission." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 10 } radiusAccClientTimeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of accounting timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 11 } radiusAccClientUnknownTypes OBJECT-TYPE SYNTAX Counter32 UNITS "packets" Nelson Informational [Page 10]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS packets of unknown type that were received from this server on the accounting port." REFERENCE "RFC 2866 section 4" ::= { radiusAccServerEntry 12 } radiusAccClientPacketsDropped OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason." ::= { radiusAccServerEntry 13 } -- New MIB objects added in this revision radiusAccServerExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAccServerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { radiusAccClient 4 } radiusAccServerExtEntry OBJECT-TYPE SYNTAX RadiusAccServerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { radiusAccServerExtIndex } ::= { radiusAccServerExtTable 1 } RadiusAccServerExtEntry ::= SEQUENCE { radiusAccServerExtIndex Integer32, radiusAccServerInetAddressType InetAddressType, radiusAccServerInetAddress InetAddress, radiusAccClientServerInetPortNumber InetPortNumber, radiusAccClientExtRoundTripTime TimeTicks, Nelson Informational [Page 11]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 radiusAccClientExtRequests Counter32, radiusAccClientExtRetransmissions Counter32, radiusAccClientExtResponses Counter32, radiusAccClientExtMalformedResponses Counter32, radiusAccClientExtBadAuthenticators Counter32, radiusAccClientExtPendingRequests Gauge32, radiusAccClientExtTimeouts Counter32, radiusAccClientExtUnknownTypes Counter32, radiusAccClientExtPacketsDropped Counter32, radiusAccClientCounterDiscontinuity TimeTicks } radiusAccServerExtIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each RADIUS Accounting server with which this client communicates." ::= { radiusAccServerExtEntry 1 } radiusAccServerInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address format used for the radiusAccServerInetAddress object." ::= { radiusAccServerExtEntry 2 } radiusAccServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry, using the version-neutral IP address format." ::= { radiusAccServerExtEntry 3 } radiusAccClientServerInetPortNumber OBJECT-TYPE SYNTAX InetPortNumber ( 1..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION Nelson Informational [Page 12]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 "The UDP port the client is using to send requests to this accounting server. The value zero (0) is invalid." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerExtEntry 4 } radiusAccClientExtRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 5 } -- Request/Response statistics -- -- Requests = Responses + PendingRequests + ClientTimeouts -- -- Responses - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received radiusAccClientExtRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent. This does not include retransmissions. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 4.1" ::= { radiusAccServerExtEntry 6 } radiusAccClientExtRetransmissions OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Nelson Informational [Page 13]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 7 } radiusAccClientExtResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets received on the accounting port from this server. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 4.2" ::= { radiusAccServerExtEntry 8 } radiusAccClientExtMalformedResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerExtEntry 9 } radiusAccClientExtBadAuthenticators OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current Nelson Informational [Page 14]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 DESCRIPTION "The number of RADIUS Accounting-Response packets that contained invalid authenticators received from this server. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerExtEntry 10 } radiusAccClientExtPendingRequests OBJECT-TYPE SYNTAX Gauge32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout, or a retransmission. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 11 } radiusAccClientExtTimeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 2" Nelson Informational [Page 15]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 ::= { radiusAccServerExtEntry 12 } radiusAccClientExtUnknownTypes OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type that were received from this server on the accounting port. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 4" ::= { radiusAccServerExtEntry 13 } radiusAccClientExtPacketsDropped OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." ::= { radiusAccServerExtEntry 14 } radiusAccClientCounterDiscontinuity OBJECT-TYPE SYNTAX TimeTicks UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of centiseconds since the last discontinuity in the RADIUS Accounting Client counters. A discontinuity may be the result of a reinitialization of the RADIUS Accounting Client module within the managed entity." ::= { radiusAccServerExtEntry 15 } Nelson Informational [Page 16]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 -- conformance information radiusAccClientMIBConformance OBJECT IDENTIFIER ::= { radiusAccClientMIB 2 } radiusAccClientMIBCompliances OBJECT IDENTIFIER ::= { radiusAccClientMIBConformance 1 } radiusAccClientMIBGroups OBJECT IDENTIFIER ::= { radiusAccClientMIBConformance 2 } -- units of conformance radiusAccClientMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for accounting clients implementing the RADIUS Accounting Client MIB. Implementation of this module is for IPv4-only entities, or for backwards compatibility use with entities that support both IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAccClientMIBGroup } ::= { radiusAccClientMIBCompliances 1 } radiusAccClientExtMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for accounting clients implementing the RADIUS Accounting Client IPv6 Extensions MIB. Implementation of this module is for entities that support IPv6, or support IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAccClientExtMIBGroup } OBJECT radiusAccServerInetAddressType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and globally unique IPv6 addresses." OBJECT radiusAccServerInetAddress SYNTAX InetAddress ( SIZE (4|16) ) DESCRIPTION Nelson Informational [Page 17]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 "An implementation is only required to support IPv4 and globally unique IPv6 addresses." ::= { radiusAccClientMIBCompliances 2 } -- units of conformance radiusAccClientMIBGroup OBJECT-GROUP OBJECTS { radiusAccClientIdentifier, radiusAccClientInvalidServerAddresses, radiusAccServerAddress, radiusAccClientServerPortNumber, radiusAccClientRoundTripTime, radiusAccClientRequests, radiusAccClientRetransmissions, radiusAccClientResponses, radiusAccClientMalformedResponses, radiusAccClientBadAuthenticators, radiusAccClientPendingRequests, radiusAccClientTimeouts, radiusAccClientUnknownTypes, radiusAccClientPacketsDropped } STATUS deprecated DESCRIPTION "The basic collection of objects providing management of RADIUS Accounting Clients." ::= { radiusAccClientMIBGroups 1 } radiusAccClientExtMIBGroup OBJECT-GROUP OBJECTS { radiusAccClientIdentifier, radiusAccClientInvalidServerAddresses, radiusAccServerInetAddressType, radiusAccServerInetAddress, radiusAccClientServerInetPortNumber, radiusAccClientExtRoundTripTime, radiusAccClientExtRequests, radiusAccClientExtRetransmissions, radiusAccClientExtResponses, radiusAccClientExtMalformedResponses, radiusAccClientExtBadAuthenticators, radiusAccClientExtPendingRequests, radiusAccClientExtTimeouts, radiusAccClientExtUnknownTypes, radiusAccClientExtPacketsDropped, radiusAccClientCounterDiscontinuity Nelson Informational [Page 18]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 } STATUS current DESCRIPTION "The basic collection of objects providing management of RADIUS Accounting Clients." ::= { radiusAccClientMIBGroups 2 } END 8. Security Considerations There are no management objects defined in this MIB that have a MAX- ACCESS clause of read-write and/or read-create. So, if this MIB is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB via direct SNMP SET operations. There are a number of managed objects in this MIB that may contain sensitive information. These are: radiusAcctServerIPAddress This can be used to determine the address of the RADIUS accounting server with which the client is communicating. This information could be useful in mounting an attack on the accounting server. radiusAcctServerInetAddress This can be used to determine the address of the RADIUS accounting server with which the client is communicating. This information could be useful in mounting an attack on the accounting server. radiusAcctClientServerPortNumber This can be used to determine the port number on which the RADIUS accounting client is sending. This information could be useful in impersonating the client in order to send data to the accounting server. radiusAcctClientServerInetPortNumber This can be used to determine the port number on which the RADIUS accounting client is sending. This information could be useful in impersonating the client in order to send data to the accounting server. It is thus important to control even GET access to these objects and possibly to even encrypt the values of these object when sending them over the network via SNMP. Not all versions of SNMP provide features for such a secure environment. Nelson Informational [Page 19]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 SNMP versions prior to SNMPv3 do not provide a secure environment. Even if the network itself is secure (for example by using IPsec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB. It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 9. References 9.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2866] Rigney, C., "RADIUS Accounting", RFC 2866, June 2000. [RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002. [RFC4001] Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 4001, February 2005. Nelson Informational [Page 20]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 9.2. Informative References [RFC2620] Aboba, B. and G. Zorn, "RADIUS Accounting Client MIB", RFC 2620, June 1999. [RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, "Remote Authentication Dial In User Service (RADIUS)", RFC 2865, June 2000. [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002. [RFC4671] Nelson, D., "RADIUS Accounting Server MIB for IPv6", RFC 4671, August 2006. Nelson Informational [Page 21]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 Appendix A. Acknowledgements The authors of the original MIB are Bernard Aboba and Glen Zorn. Many thanks to all reviewers, especially to Dave Harrington, Dan Romascanu, C.M. Heard, Bruno Pape, Greg Weber, and Bert Wijnen. Author's Address David B. Nelson Enterasys Networks 50 Minuteman Road Andover, MA 01810 USA EMail: dnelson@enterasys.com Nelson Informational [Page 22]
RFC 4670 RADIUS Acct Client MIB (IPv6) August 2006 Full Copyright Statement Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Nelson Informational [Page 23]